In many
places, the gas-fired pool heaters are still the more popular heating system
favored by pool owners. In relation to this, today’s new models of gas-fired
heaters have much higher efficiencies compared to their older models.
Many are
of the belief that the pool gas heaters Sydney is the fastest pool or spa heater.
Depending on your climate and the frequency you are using your pool, however,
they may not be the most energy-efficient options when compared to heat pumps
and solar pool heaters.
The system
These pool
heaters use either propane or natural gas to power it up. In the system, when
the pump circulates the pool’s water, it is drawn from the pool itself. In
turn, this is passed to a filter and onto the heater.
The gas
burns in the combustion chamber of the heater. The process generates the heat
to run the water into circulation. The heated water is then transferred and
returned to the main reservoir in the pool to heat it up.
The
gas-powered heaters are very efficient in heating the pools in a short period
of time. They are ideal in heating the pool altogether very quickly.
Comparison
Comparatively,
they are good for pools that are not being used on a regular basis, or pools
where you want them to heat up fast enough to be used right away.
In
addition, these pool gas heaters Sydney can be set to maintain any desired temperature
regardless of the present weather or climate, which is actually unlike the heat
pump or the solar pool heaters.
Size/efficiency/cost
There are
several considerations when you choose your gas swimming pool heater that you
want to use. The important ones are the size of your pool, the efficiency of
the heater used and the total cost.
A pool
professional can help you do your proper sizing analysis for your particular
swimming pool, including how to determine the size of the pool heater, too.
Essentially,
the pool heater is sized according to the surface area of the pool and the
difference between the pool and the average of air temperatures.
There are
other factors, too (wind exposure, humidity levels, and cool night
temperatures) that affect the heating load of the outdoor pools and are
included in the computation.
Larger
heater is needed in pools located in areas with higher average wind speed at
the pool surface, with lower humidity and cool nights. All of the three factors
will lower the water temperature.
Standard test
The new
models of the swimming pool gas heaters Sydney have a standard test. They need
to go through this in order to determine their energy efficiency based on their
BTU (British thermal unit) output.
The
installation and the proper maintenance of your gas-powered pool heater can certainly
optimize its efficiency. A qualified pool professional is the best person to install
your heating system. They are also best when performing complicated maintenance
or repair tasks on your system.
In time,
you would need to tune up your pool heater (usually in annual basis).Remember
that the scaling in the burner or in the heat exchanger can decrease efficiency
after a period of time.