A heat pump for a pool is regarded as the most efficient
solution for heating. This can save like 65 percent to 70 percent in heating
capacity rather than any heating equipment. Moreover, the inverter type proves
to be environmentally friendly as a product. This is highly favored by many
customers. But then, do you like choosing the most suitable one for your pool?
Pool Size
The pool size goes by the measurement of m3 or cubic meters.
As with the classic pool shape, 1 cubic or 1,000-liters is the ideal one. The
1,000-litrs is also for curved swimming pools. Now with a round pool, calculate
the pool size like length times width times height times 0.78. It will equate
to 48,750 liters if it’s 5mx5mx2.5mx0.78.
Pool Cover Use
If you will install a heat pump pool Melbourne, better to
make use of a pool cover. This is a practical choice to avoid the loss of heat
of the water in a pool. This is true especially during the night, Make use of
pool cover to save like 50 percent energy.
If there’s no cover for a swimming pool, just settle with a
heat pump pool in Melbourne with a higher heating capacity like 35 percent
higher. Opt for a heat pump pool then. A swimming pool with 30 cubic meters and
with a pool cover, settle with a heat pump pool of 9.0 KW to 12.0 KW.
Heating Capacity
The heat pump pool in Melbourne considers the heating
capacity and it’s something to concentrate on. 1 Kilowatt would be enough to
heat 6.5 to 7 cubic meters in the water of a pool. Assuming it can heat like
eight to ten degrees Centigrade for a pool with pool cover following 26-degree
temperature, 1 cubic meter of water would somehow need 0.4 KW of heat. This can
go at a 15-degrees temperature. Now, the 1-cubic water meter requires 0.3 KW of
heat that has to be heated.
Noise
Know that some heat pump pool in Melbourne is noisy. If you
will put your heat pump next to the pool basin, you better choose a silent
model. There’s an inverter pump as well with a super silent type of compressor,
plus a DC inverter fan. When in regulation mode, the pump will not any more
sound than just a puff of air. This could only just be 20 decibels.
Volume of the Pool
This is another factor to keep in mind when choosing a heat
pump pool in Melbourne. The models would differ in that it relies much on the
number of the water’s cubic meters.
Active Defrosting
It will likewise depend on the region you are living in. The
function for active defrost will be your best friend. It will also enable
optimal operation at low temperatures.
Inverter Technology
This will adjust the consumption of energy by heat pumps.
This is considering the rapid increase of temperature plus the maintenance at
the set-point temperature. This is true with the reduced power. The regulation of
working in outdoor conditions ends up in saving like 30 percent.
So, keep these expert suggestions in mind when choosing heat pump pool in Melbourne!
