Tips For Installing Pool Gas Heaters

 

How you install your pool heater determines how efficiently the heater will operate. These pool gas heaters Melbourne need maintenance in order to continue working with factory efficiency. If you reduce the intake of air, fuel, and air ratio, the ignition system or the venting of the heater will cause a negative reaction.

 

When the fuel-to-air ratio for your pool heater changes from the factory specifications, the heater tends to operate less efficiently. For a clean burn, there is an optimal ratio of fuel-to-air, so when you change these values the heater starts to form soot. The soot itself also contributes to a decrease in the burning efficiency.

 

Some issues that you may face when using pool gas heaters Melbourne include:

 

Galvanic corrosion. When installing a new pool heater, you need to bond the casing of your pool heater. Bonding the pool heater and the pump will protect them against galvanic corrosion by not allowing a potential difference between the heater and the water. If there is no additional bonding grid protection, it is possible for advanced corrosion to form inside the heater.

 

Spider webs in swimming pool heaters. Spiders look for areas like pool heaters to build their homes because they like the smell of natural gas and propane. The webs can obstruct the flow of fuel in the burner orifices through the nozzle, throwing off the air-to-fuel ratio that the heater needs to burn efficiently and cleanly.

 

Leaves inside the pool heaters. The accumulation of leaves and other debris within the pool heaters can result in poor heating efficiency. Also, having this build-up on top of the heater or burner tray can be a serious fire hazard.

 

In order to prevent such problems from occurring, make sure that your heater has enough room around for fresh air delivery and a properly sized ventilation system.

 

It is highly recommended to perform regular cleaning of the heater to vacuum out leaves, spider webs, rodent nests, and other debris. This helps ensure the fuel-to-air ratio that your heater operates will stay near the initial specifications of the manufacturer.

 

Pool Gas Heater Pipe Size

When you install a gas pool heater, it is crucial that it has sufficient gas flow to the heater so that it can work properly. If there is not enough gas flow, some heaters will run inefficiently while others will not turn on at all.

 

You can prevent this problem by making sure that the gas pipe going to your pool heater is large enough, at the same time, the gas meter for your home is large enough to handle the draw from a big heater. The length of the run from the main gas meter to the heater location determines the gas line sizing for pool heaters, also taking into account various fittings and turns the pipe makes.

 

In terms of gas demand, it is extremely large for pool gas heaters Melbourne. For this, you should not underestimate the gas needs for your pool heater. Before installing a new pool heater call your gas utility company to ask whether your existing gas meter can accommodate the new, heavy draw appliance.